Step-by-Step Guide to Installing Levolor Blinds Outside Mount- A Comprehensive DIY Tutorial

How to Install Levolor Blinds – Outside Mount

Installing Levolor blinds on an outside mount can be a straightforward and rewarding DIY project. These blinds are designed to fit on the outside of your window frame, offering a sleek and modern look. In this article, we will guide you through the step-by-step process of installing Levolor blinds on an outside mount, ensuring a perfect fit and optimal functionality.

Materials and Tools Needed

Before you begin, gather the following materials and tools:

– Levolor blinds (with the appropriate size for your window)
– Measuring tape
– Stud finder
– Drill and drill bits
– Screwdriver
– Mounting brackets
– Wall anchors (if necessary)
– Level
– Safety glasses and gloves (optional)

Step 1: Measure Your Window

Start by measuring the width and height of your window. Make sure to measure from the outside edge of the window frame to the opposite edge, as this will ensure a proper fit for your Levolor blinds. Write down the measurements and refer to them when ordering your blinds.

Step 2: Choose the Right Blinds

Select the Levolor blinds that match your window size and style preferences. Make sure to check the product specifications to ensure compatibility with an outside mount installation.

Step 3: Mark the Mounting Points

Using a stud finder, locate the studs in the wall where you will be mounting the brackets. Mark the center of each stud with a pencil. If there are no studs, use wall anchors to secure the mounting brackets.

Step 4: Install the Mounting Brackets

Attach the mounting brackets to the wall using the provided screws and wall anchors. Make sure the brackets are level and securely fastened to the wall. If using wall anchors, follow the manufacturer’s instructions for proper installation.

Step 5: Attach the Blinds to the Brackets

Place the blind’s headrail onto the mounting brackets. Ensure that the brackets are aligned with the slots on the headrail. Slide the headrail into the brackets until it is securely fastened.

Step 6: Adjust the Blinds

Adjust the vanes of the blinds to your desired position. If you need to make any further adjustments, refer to the manufacturer’s instructions for specific guidance.

Step 7: Final Check

Double-check that the blinds are properly mounted and aligned. Make sure they are securely fastened to the mounting brackets and that the vanes are functioning correctly.

Congratulations! You have successfully installed Levolor blinds on an outside mount. Enjoy the fresh, new look and the functionality of your new blinds.