Step-by-Step Guide to Installing a Wall-Hung WC for a Modern and Space-Saving Bathroom

How to Install Wall Hung WC

Installing a wall hung WC can transform the look and functionality of your bathroom. This modern and sleek design not only saves space but also adds a touch of elegance to your bathroom. If you’re considering installing a wall hung WC, follow these step-by-step instructions to ensure a successful installation.

1. Gather the Necessary Tools and Materials

Before you begin the installation process, gather all the necessary tools and materials. You will need:

– Wall hung WC
– Stud finder
– Level
– Drill and drill bits
– Screws
– Wall anchors
– plumber’s tape
– Teflon tape
– Water supply lines and shutoff valves
– P-trap and drain line
– Adjustable wrench
– Tube cutter
– Pliers

2. Plan the Placement

Determine the exact location where you want to install the wall hung WC. Make sure the area is free of any obstacles and that the plumbing is accessible. It’s essential to have enough space for the user to enter and exit comfortably.

3. Mark the Studs

Use a stud finder to locate the studs in the wall where the WC will be mounted. Mark the stud locations with a pencil or a piece of chalk. It’s crucial to ensure that the WC is securely mounted to the studs for safety reasons.

4. Attach the Hangers

Attach the hangers to the wall using the provided screws and wall anchors. Ensure that the hangers are level and evenly spaced. The distance between the hangers should match the width of the WC.

5. Mount the WC

Place the WC on the hangers and align it with the marks you made on the studs. Secure the WC to the hangers using the provided screws. Tighten the screws evenly to ensure a stable installation.

6. Connect the Plumbing

Attach the water supply lines to the WC using plumber’s tape and Teflon tape. Make sure the connections are tight and leak-proof. Connect the drain line to the P-trap and secure it to the wall.

7. Test the Installation

Turn on the water supply and check for leaks. If there are no leaks, turn on the toilet and flush it a few times to ensure that the tank and bowl are securely connected.

8. Final Touches

Once you’ve confirmed that the installation is complete and leak-free, you can add any additional fixtures or accessories, such as a toilet brush holder or a toilet paper holder. Clean the area around the WC and enjoy your new, modern bathroom.

Installing a wall hung WC can be a challenging task, but with these step-by-step instructions, you can successfully complete the installation. Always remember to consult a professional plumber if you’re unsure about any part of the process to ensure a safe and secure installation.