How to Install a Bump Fire Stock
Installing a bump fire stock on your firearm can significantly enhance your shooting speed and accuracy. Whether you’re a recreational shooter or a competitive shooter, a bump fire stock can provide you with a tactical advantage. In this article, we will guide you through the process of installing a bump fire stock on your firearm step by step.
1. Gather the Necessary Tools and Materials
Before you begin the installation process, make sure you have all the necessary tools and materials. You will need the following:
– Bump fire stock
– Screwdriver (flat-head or Phillips-head, depending on the stock)
– Gunsmithing grease or lubricant
– Gun cleaning cloth
– Safety glasses
2. Prepare Your Firearm
Ensure that your firearm is unloaded and the magazine is removed. Point the firearm in a safe direction and put on your safety glasses to protect your eyes during the installation process.
3. Remove the Existing Stock
Locate the stock release lever or button on your firearm and remove the existing stock. Depending on the make and model of your firearm, the stock release mechanism may vary. Refer to your firearm’s manual for specific instructions on removing the stock.
4. Install the Bump Fire Stock
Take the bump fire stock and align it with the mounting points on your firearm. Most bump fire stocks use a standard AR-15/M16 pattern, so they should fit most firearms with the same pattern. Secure the stock in place using the included screws and a screwdriver. Tighten the screws securely, but be careful not to overtighten them, as this may damage the stock or the firearm.
5. Lubricate the Stock
Apply a small amount of gunsmithing grease or lubricant to the moving parts of the bump fire stock, such as the buffer tube and the internal mechanism. This will help reduce friction and ensure smooth operation.
6. Reattach the Buffer Tube
If your firearm’s buffer tube is removable, reattach it to the bump fire stock using the included hardware. Make sure the buffer tube is securely fastened to the stock.
7. Test the Bump Fire Stock
With your firearm unloaded, hold it in a safe position and gently move the stock back and forth. The stock should move smoothly without any resistance. If you encounter any issues, double-check the installation and make sure all screws are tight.
8. Finalize the Installation
Once you’ve confirmed that the bump fire stock is functioning correctly, take a moment to wipe away any excess grease or lubricant with a gun cleaning cloth. This will help keep your firearm clean and prevent any buildup of dirt or debris.
Congratulations! You have successfully installed a bump fire stock on your firearm. With this new accessory, you should see an improvement in your shooting speed and accuracy. Always remember to follow all local, state, and federal laws regarding the use of bump fire stocks and other accessories.
